Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Steering Wheel Airbag on the Volkswagen Lupo

Model: Volkswagen Lupo MK 1 - Years: 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005
Part: Steering wheel

Video tutorial

To remove and replace the steering wheel airbag on this car model, follow the instructions and procedure outlined below for a proper replacement. After sitting in the driver's seat, locate the hole at the back of the steering wheel when it is turned 90°. Insert a screwdriver to release the airbag and horn assembly.

Perform the same procedure on the other hole directly opposite. This allows you to extract the airbag assembly, then disconnect the yellow connector located at the centre of the steering wheel.

You have now completely removed the airbag assembly.


Updated on 29 July 2026 by ScegliAuto


Related tutorials

How to Remove the Steering Wheel with Airbag on Volkswagen Lupo
How to Remove the Steering Wheel with Airbag on Volkswagen Lupo
Volkswagen Lupo (1998-2005 / MK 1) How do you remove the steering wheel with airbag on a Volkswagen Lupo? This operation is straightforward if you follow the steps. Insert a medium-len…
How to Remove the Steering Wheel and Airbag from a Volkswagen Lupo
How to Remove the Steering Wheel and Airbag from a Volkswagen Lupo
Volkswagen Lupo (1998-2005 / MK 1) In this video, see how to dismantle the steering wheel and airbag from a Volkswagen Lupo: first, it is best to disconnect the negative terminal to av…
How to remove the steering wheel from the Volkswagen Lupo
How to remove the steering wheel from the Volkswagen Lupo
Volkswagen Lupo (1998-2005 / MK 1) To remove the steering wheel from the Volkswagen Lupo, the operation is quite simple. First, rotate the steering wheel so that, at the back of the wh…

Other guides you may be interested in

How to enter the radio code in the Opel Zafira?

In the Opel Zafira, it may happen that the radio locks and consequently requests the appropriate security code, especially after disconnecting or replacing the battery. The code can be found in the documents provided at purchase or through one of the various online recovery services. Once obtained, enter it by following the procedure shown in this tutorial. First, switch on the instrument panel, then press and hold both the "AS" button and the left knob for about 5 seconds. Next, enter the first digit by repeatedly pressing the "1" button, continue with the next 3 buttons, and save the setting by pressing the "AS" button again.

Watch the video!


by ScegliAuto

More videos