Do it yourself
Frequently asked questions about cars and motorcycles

How to Remove the Steering Wheel and Airbag from a Volkswagen Lupo

Model: Volkswagen Lupo MK 1 - Years: 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005
Part: Steering wheel

Video tutorial

In this video, see how to dismantle the steering wheel and airbag from a Volkswagen Lupo: first, it is best to disconnect the negative terminal to avoid any unpleasant surprises. At the bottom of the steering wheel, there are two holes where you will insert two flathead screwdrivers.

It may be necessary to remove the lower cover of the steering column by taking out the Phillips screws to allow for the insertion of the two screwdrivers. This will unlock the airbag, which you can easily remove by disconnecting the electrical connector and the horn plug.

To remove the steering wheel, first mark with a marker to find the point to reposition it. Then, using a ratchet spanner, remove it from its housing.


Updated on 10 October 2026 by ScegliAuto


Related tutorials

Volkswagen Lupo (1998-2005 / MK 1) To remove and replace the steering wheel airbag on this car model, follow the instructions and procedure outlined below for a proper replacement. Aft…
Volkswagen Lupo (1998-2005 / MK 1) How do you remove the steering wheel with airbag on a Volkswagen Lupo? This operation is straightforward if you follow the steps. Insert a medium-len…
Volkswagen Lupo (1998-2005 / MK 1) To locate the fuse box containing all the various fuses in your Volkswagen Lupo, follow these steps. First, park the car safely on a flat surface, th…

Other guides you may be interested in

How to enter the radio code in the Opel Zafira?

In the Opel Zafira, it may happen that the radio locks and consequently requests the appropriate security code, especially after disconnecting or replacing the battery. The code can be found in the documents provided at purchase or through one of the various online recovery services. Once obtained, enter it by following the procedure shown in this tutorial. First, switch on the instrument panel, then press and hold both the "AS" button and the left knob for about 5 seconds. Next, enter the first digit by repeatedly pressing the "1" button, continue with the next 3 buttons, and save the setting by pressing the "AS" button again.

Watch the video!


by ScegliAuto

More videos