Do it yourself
Frequently asked questions about cars and motorcycles

Guide to Replacing the Speakers in the Volkswagen Nivus

Model: Volkswagen Nivus MK 1 - Years: 2020, 2021, 2022, 2023, 2024, 2025, 2026
Part: Speaker

Video tutorial

In this guide, find instructions to remove and replace the factory speakers in the Volkswagen Nivus. First, open the front door of your car and start removing the door panel; to do this, unscrew the mounting screws and disconnect the electrical connector of the switch panel found at the back.

Now, unscrew the side screws of the speaker, removing the plastic ring; then remove the speaker by disconnecting the power connector. Finally, install the new speaker and reassemble everything!


Updated on 5 August 2026 by ScegliAuto


Related tutorials

Volkswagen Nivus (2020-2026 / MK 1) You can completely clear the Service light on the Volkswagen Nivus by turning on the instrument cluster, inserting the key into the ignition. Once th…
Volkswagen Nivus (2020-2026 / MK 1) This guide provides the necessary instructions to reset the engine oil light on the Volkswagen Nivus in simple and quick steps. First, get inside the…
Volkswagen Nivus (2020-2026 / MK 1) The fuses in the Volkswagen Nivus are divided among the specific fuse boxes installed in the vehicle: in this car model, you can find two boxes for h…
ScegliAuto offers an extensive international collection of automotive tutorials available in 12 languages. Each guide combines instructional videos with original explanations written by experienced human editors, along with information about the car models covered.

What does the "Code 82" message indicate in the Chevrolet Orlando and how to remove it?

If the "Code 82" message appears on the dashboard of your Chevrolet Orlando, it means that the service interval in miles or time has been reached. Once all scheduled maintenance tasks are completed, you can remove the warning by following the simple procedure shown in this tutorial. First, insert the key and turn on the ignition, then press the "MENU" button located on the left control stalk and navigate to the screen displaying the "Reset" option. At this point, press the "SET/CLR" button at the end of the same stalk and confirm the reset.

Watch the video!


by ScegliAuto

More videos