Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to remove the rear bumper of the Volkswagen Tiguan?

Model: Volkswagen Tiguan BW, MK 2, AD - Years 2016-2025
Part: Rear bumper

To remove the rear bumper of the Volkswagen Tiguan, you need to remove the wheel arch trims so that all the underlying screws can be accessed. These screws can now be loosened along with those located at the bottom of the bumper. Once all these screws are loosened, use a tool to pry off the bumper's retaining clips from its housing. After the bumper is removed, you can insert the new replacement part, securing it properly with screws and clips.

Updated on 5 August 2026 by ScegliAuto

Video tutorial

Related tutorials

How do you remove the rear bumper of the Volkswagen Tiguan?
How do you remove the rear bumper of the Volkswagen Tiguan?
Volkswagen Tiguan (2024-2026 / MK 3) It will be possible to remove the rear bumper of the Volkswagen Tiguan by opening the rear hatch, in order to loosen the screws located on the sides …
Dismantling the rear bumper of the Volkswagen Tiguan
Dismantling the rear bumper of the Volkswagen Tiguan
Volkswagen Tiguan (2016-2025 / BW, MK 2, AD) Today's instructions will allow us to disassemble and replace the rear bumper of the Volkswagen Tiguan. First, let's open the rear hatch of the trunk…
Replacing the Reverse Light Bulb on the Volkswagen Tiguan
Replacing the Reverse Light Bulb on the Volkswagen Tiguan
Volkswagen Tiguan (2007-2016 / 5N, MK 1) Follow these steps to remove and replace the reverse light bulb and rear bumper on the Volkswagen Tiguan. First, open the boot and start unscrewing t…

Other guides you may be interested in

How to Connect the Cables to the Battery of the Citroen Xsara Picasso?

In this tutorial, you will see how to connect the cables to the battery of the Citroen Xsara Picasso, useful if you need to recharge it or perform an emergency start. First, ensure the key is not inserted, then open the bonnet and move to the front of the left headlamp. Next, locate the bolt just behind the filter box and connect the positive terminal clamp to it. Now you can connect the negative terminal to any point on the chassis, such as the indicated point. Once the operation is complete, ensure you disconnect the negative first and then the positive.

Watch the video!


by ScegliAuto

More videos