Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Volkswagen
    3. :
  3. Passat
    4. : Where is the windshield washer pump fuse located in the Volkswagen Passat?

Volkswagen Passat - Video tutorial

Model: Volkswagen Passat B7 - Years 2010-2014
Part: Pump
Operation: Where is the windshield washer pump fuse located in the Volkswagen Passat?

In this video, we can see where the windshield washer pump fuse is located in the Volkswagen Passat, which is an element to check in case of malfunction. As shown, it is located in the box inside the cabin, specifically behind the dashboard partition on the driver's side, and it is the second fuse in the second row of the lower group. If it is faulty, make sure to use a replacement with the same amperage and always operate with the vehicle turned off. Additionally, we can check the condition of the corresponding relay, located in the box below the dashboard on the same side.


Posted on 10 July 2023 by ScegliAuto

    Frequently Asked Questions

    • Passat 2010-2014 - What problems does the oil pump of the Volkswagen Passat 2.0 TDi present? Read Answer
    • Passat 2005-2010 - How much does it cost to replace the water pump in Volkswagen Passat? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos