Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Removing Windscreen Washer Pump from Volkswagen Passat

Model: Volkswagen Passat 3BG, B5 - Years 1996-2005
Part: Pump

In this video tutorial, you will learn how to remove and replace the windscreen washer pump on a second-generation Volkswagen Passat. First, remove the front wing on the left side by unscrewing the fixing screws; then access the washer fluid pump. At this point, remove all the fluid from the reservoir and pull out the pump along with the wiring: disconnect the hose and the electrical connector to remove it and replace it with the new one, as shown in the video. Finally, reassemble everything by applying the reverse procedure!

Updated on 18 April 2026 by ScegliAuto

Video tutorial

Related tutorials

How to replace the windshield washer pump of the Volkswagen Passat
Volkswagen Passat (2005-2010 / B6, 3C) In this guide, we will see the main instructions that will allow us to disassemble and replace the windshield washer pump of the Volkswagen Passat. F…
Where is the Windscreen Washer Pump Fuse in the Volkswagen Passat?
Where is the Windscreen Washer Pump Fuse in the Volkswagen Passat?
Volkswagen Passat (2010-2014 / B7) This video shows where to find the fuse for the windscreen washer pump in the Volkswagen Passat, an element to check in case of malfunction. As shown…
How to Replace the Water Pump of a Volkswagen Passat
How to Replace the Water Pump of a Volkswagen Passat
Volkswagen Passat (2010-2014 / B7) Before starting, open the front bonnet of your Volkswagen Passat. Begin by removing the cover of the auxiliary belt and the belt itself, loosening th…

How to Repair the Key Spring of the Peugeot 207?

Over time, frequent use of the key's flip mechanism in the vehicle, dozens of times a day, inevitably leads to wear of the internal spring. As shown in this video, replacing the spring is quite simple and takes little time. After opening the casing halfway, first position the key, then the spring housing, and finally insert the spring into the previously mentioned housing. Close the casing by rotating it clockwise, ensuring all components fit perfectly, and test the key's flip mechanism.

Watch the video!


by ScegliAuto

More videos