Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to reset the service light on the Volkswagen Polo?

Model: Volkswagen Polo 6R, MK V, Polo 5, Polo V, MK 5 - Years: 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017
Part: Service warning light

See other generations:
Video tutorial

Resetting the service light on the Volkswagen Polo, as shown in this tutorial, is an extremely simple and quick operation. Before proceeding, ensure you have completed all required scheduled maintenance tasks.

Start by sitting inside the cabin, then insert the key but leave it in the initial position. Next, press and hold the "0.0/SET" button located at the centre of the dashboard, simultaneously switch on the instrument cluster, and after about 2 seconds, press the opposite button.

To verify that the reset was successful, you can restart the vehicle.


Updated on 10 August 2026 by ScegliAuto


Related tutorials

How to Reset the "Service" Light on a Volkswagen Polo
How to Reset the "Service" Light on a Volkswagen Polo
Volkswagen Polo (2009-2017 / 6R, MK V, Polo 5, Polo V, MK 5) Before you can start, sit in the driver's seat of your Volkswagen Polo and close all the doors. Begin by pressing and holding the "0.0/SET" button lo…
How to Reset the Service Light on a Volkswagen Polo?
How to Reset the Service Light on a Volkswagen Polo?
Volkswagen Polo (1994-2003 / Polo 3, MK III, 6N, Polo III, MK 3) To reset the Service light on a Volkswagen Polo, press and hold the button located on the right side of the instrument panel, just below the speedome…
How to reset the Oil Service light on the Volkswagen Polo?
How to reset the Oil Service light on the Volkswagen Polo?
Volkswagen Polo (2009-2017 / 6R, MK V, Polo 5, Polo V, MK 5) To reset the Oil Service light on the Volkswagen Polo, press the button located immediately below the instrument cluster on the left side, then inser…

Other guides you may be interested in

How to reset the Service light on a 2019 Jeep Renegade?

The Service light, depicted as a yellow spanner, illuminates as scheduled to remind the driver that it is time for scheduled maintenance. This means that the set mileage has been reached, or the expected time has passed. The procedure involves turning on the instrument cluster, pressing the accelerator three times, and then turning off the ignition. After this, keep the brake pressed, turn the ignition back on, and then turn it off again. Upon the next ignition, you will notice that the light has been reset.

Watch the video!


by ScegliAuto

More videos