Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Interior Light Fitting of the Volkswagen Golf

Model: Volkswagen Golf Golf VII, MK 7, Golf 7 - Years 2012-2019
Part: Interior dome light bulb

Here are the main steps on how to remove and replace the interior light fitting and its bulbs of the Volkswagen Golf. First, get inside the vehicle and start removing the plastic cover found in the centre of the light fitting; then pry at the sides to unclip it, disconnecting the two electrical connectors found at the back, as shown in the video. Now replace the small bulb bulbs if necessary, or replace the entire light fitting; then reassemble everything, following the video tutorial to the end!

Updated on 10 August 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Interior Light Fitting of the Volkswagen Golf
How to Replace the Interior Light Fitting of the Volkswagen Golf
Volkswagen Golf (2003-2008 / MK 5, Golf 5, Golf V) In this brief guide, follow the steps to remove and replace the interior light fitting and bulbs of the Volkswagen Golf. First, get inside the vehicl…
Replacing Interior Lights in a Volkswagen Golf
Replacing Interior Lights in a Volkswagen Golf
Volkswagen Golf (2012-2019 / Golf VII, MK 7, Golf 7) In this video tutorial, you will learn how to remove and replace the interior lights of a seventh-generation Volkswagen Golf, specifically the Varian…
How to Replace the Courtesy Light Fitting on a Volkswagen Golf?
How to Replace the Courtesy Light Fitting on a Volkswagen Golf?
Volkswagen Golf (1997-2003 / Golf IV, MK 4, Golf 4) To replace the courtesy light fitting on a Volkswagen Golf, use a small flat-head screwdriver to detach the fitting by releasing its clips. Once remo…

How to Replace the External Wing Mirror on a Ford C MAX

In the event of a breakage, it will be necessary to replace the external wing mirror on the 2011 Ford C MAX. This operation is easily performed independently. Start by removing the internal cover of the mirror with a plastic lever. Then, use a socket wrench to remove the securing pins. Once the pins are removed, you can take off the mirror, but not before disconnecting the power connectors. Then proceed to fit the new mirror. First, connect the connectors and then secure the mirror to its housing with the pins. Refit the plastic cover and test the operation of the electric mirror using the controls.

Watch the video!


by ScegliAuto

More videos