Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Interior Light Fitting on a Volkswagen Golf 6

Model: Volkswagen Golf Golf 6, MK 6, 5K1, Golf VI - Years: 2008, 2009, 2010, 2011, 2012
Part: Interior dome light bulb

See other generations:
Video tutorial

Today, you will learn how to remove and replace the interior light fitting on a sixth-generation Volkswagen Golf, following the instructions below. First, get inside the vehicle and open the light fitting cover; then, lever out the plastic cover from the sides to remove it, and unscrew the fixing screws located underneath, as shown in the video.

At this point, you can remove the interior light fitting by disconnecting the electrical connector for the bulbs; follow the video to the end!


Updated on 14 April 2026 by ScegliAuto


Related tutorials

How to Replace the Interior Light Bulbs of a Volkswagen Golf
How to Replace the Interior Light Bulbs of a Volkswagen Golf
Volkswagen Golf (1997-2003 / Golf IV, Golf 4, MK 4) Today's instructions will show you how to remove and replace the interior light bulbs of a Volkswagen Golf. First, get inside the vehicle and start p…
How to change the interior light fitting of the Volkswagen Golf
How to change the interior light fitting of the Volkswagen Golf
Volkswagen Golf (2003-2008 / Golf 5, MK 5, Golf V) This brief and simple guide outlines the steps to remove and replace the interior light fitting of the Volkswagen Golf. First, get inside the vehicle…
Removing the Interior Light Unit of a Volkswagen Golf 5
Removing the Interior Light Unit of a Volkswagen Golf 5
Volkswagen Golf (2003-2008 / Golf 5, MK 5, Golf V) In this video tutorial, you will learn how to remove the interior light unit of a fifth-generation Volkswagen Golf. First, get inside the car and use…

How to reset the tyre pressure warning light on the Kia Niro EV?

To reset the tyre pressure warning light on the Kia Niro EV, inflate the tyres until they reach the correct pressure value. This value is indicated on the sticker attached to the driver's door pillar. Once the tyres are inflated, turn on the instrument cluster to check that the warning light has completely disappeared from the display. If it is still present, you may need to drive for a few miles to ensure it disappears completely from the screen.

Watch the video!


by ScegliAuto

More videos