Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to change the interior light fitting of the Volkswagen Golf

Model: Volkswagen Golf Golf 5, MK 5, Golf V - Years: 2003, 2004, 2005, 2006, 2007, 2008
Part: Interior dome light bulb

See other generations:
Video tutorial

This brief and simple guide outlines the steps to remove and replace the interior light fitting of the Volkswagen Golf. First, get inside the vehicle and start prying on the sides of the plastic cover to remove the first piece of the fitting; then, unscrew the securing screws found underneath to detach it from the roof, disconnecting the electrical connector of the bulb as shown in the video.

At this point, replace the bulbs if necessary; then remount the new fitting by applying the reverse procedure!


Updated on 20 June 2026 by ScegliAuto


Related tutorials

How to Replace the Courtesy Light Fitting on a Volkswagen Golf?
How to Replace the Courtesy Light Fitting on a Volkswagen Golf?
Volkswagen Golf (1997-2003 / Golf IV, Golf 4, MK 4) To replace the courtesy light fitting on a Volkswagen Golf, use a small flat-head screwdriver to detach the fitting by releasing its clips. Once remo…
How to replace the interior light bulbs of the Volkswagen Golf?
How to replace the interior light bulbs of the Volkswagen Golf?
Volkswagen Golf (1997-2003 / Golf IV, Golf 4, MK 4) To replace the interior light bulbs of the Volkswagen Golf, use a tool like a screwdriver to pry open the corresponding light fixture: this will allo…
Replacement of Interior Bulbs with LED Model
Replacement of Interior Bulbs with LED Model
Volkswagen Golf (2008-2012 / Golf 6, MK 6, 5K1, Golf VI) Replacing the interior bulbs with LED ones will give the cabin a more technical and modern appearance. The operation is extremely simple and does not…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos