Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Volkswagen
    3. :
  3. Sharan
    4. : How to lower or configure the rear seats of the Volkswagen Sharan.

Volkswagen Sharan - Video tutorial

Model: Volkswagen Sharan MK 2, 7N - Years 2010-2023
Part: Seat
Operation: How to lower or configure the rear seats of the Volkswagen Sharan.

We will briefly see the instructions that will allow us to lower and configure the rear seats of the Volkswagen Sharan. First, we open the rear door of the trunk and start by lowering, if necessary, the two additional seats; simply pull the lever to rotate the entire seat, in order to lower it completely, as shown in the video. Similarly, we will lower the row of three rear seats; this way we will significantly increase the cargo volume of the trunk. We then reconfigure the seats to their original position, applying the reverse procedure!


Posted on 7 August 2023 by ScegliAuto



Covered disassemble the seat of a Vw Sharan
Volkswagen Sharan (1995-2010 / MK 1, 7M) Removing the rear seat of a Volkswagen Sharan? We lower the seat back, move the seat forward, let it rest on the seat of the seat itself. We pull the
How do I remove the interior tailgate panel on the Volkswagen Sharan?
Volkswagen Sharan (2010-2023 / MK 2, 7N) In order to remove the internal panel of the rear hatch of the Volkswagen Sharan you have to open the hatch and pry with a thin object, so that the p
How to manually unlock the tailgate in the Volkswagen Sharan?
Volkswagen Sharan (2010-2023 / MK 2, 7N) In this tutorial, we can see how to manually unlock the trunk in the Volkswagen Sharan, a very simple and quick operation to be performed, for exampl

How to reset the oil service in the Fiat Toro?

In this tutorial we can see how to reset the oil service in the Fiat Toro. Before carrying out this simple and quick operation, make sure that you have completed any required maintenance work. We start by inserting the key but leaving it in the initial position, after which we keep the accelerator pedal fully depressed and at the same time turn on the instrument panel. At this point, always keeping the accelerator pressed, press the brake pedal 5 consecutive times and, with the pedals in position, turn off the ignition. We check that the procedure has been successful by starting the vehicle.

Watch the video!


by ScegliAuto

More videos