Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Inner Panel of the Tailgate on a Volkswagen Sharan?

Model: Volkswagen Sharan 7N, MK 2 - Years: 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021
Part: Checks and maintenance

See other generations:
Video tutorial

To remove the inner panel of the tailgate on a Volkswagen Sharan, open the tailgate and use a thin object to pry off the pieces that make up the panel. Start from the top above the rear window, unclipping the internal clips.

Then proceed with the clips at the sides of the rear window using the same method. To remove the lower part, manually detach the two square panels located at the sides, allowing you to lever out the lower panel from inside its housing.

This will enable you to fit and secure all the new panels.


Updated on 20 June 2026 by ScegliAuto


Related tutorials

How to Replace the Boot Lock on a Volkswagen Sharan
How to Replace the Boot Lock on a Volkswagen Sharan
Volkswagen Sharan (2010-2023 / 7N, MK 2) In this video tutorial, you will learn how to remove and replace the rear boot lock on a Volkswagen Sharan. First, open the rear boot and start by re…
Replacement of the motor and window lift mechanism of the Volkswagen Sharan.
Replacement of the motor and window lift mechanism of the Volkswagen Sharan.
Volkswagen Sharan (2010-2023 / 7N, MK 2) Today we will discover the main instructions that will allow us to disassemble and replace the window motor and mechanism of the Volkswagen Sharan. F…
How to Replace the Tailgate Motor on the Volkswagen Sharan
How to Replace the Tailgate Motor on the Volkswagen Sharan
Volkswagen Sharan (2010-2023 / 7N, MK 2) To replace the tailgate motor on the Volkswagen Sharan, loosen the screws securing the panel in place. Once the screws are loosened, detach the panel…

    Frequently Asked Questions

    • Sharan 2010-2023 - Where is the jack of the Volkswagen Sharan located? Read answer

How to reset the tyre pressure warning light on the Kia Niro EV?

To reset the tyre pressure warning light on the Kia Niro EV, inflate the tyres until they reach the correct pressure value. This value is indicated on the sticker attached to the driver's door pillar. Once the tyres are inflated, turn on the instrument cluster to check that the warning light has completely disappeared from the display. If it is still present, you may need to drive for a few miles to ensure it disappears completely from the screen.

Watch the video!


by ScegliAuto

More videos