Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Tailgate Motor on the Volkswagen Sharan

Model: Volkswagen Sharan 7N, MK 2 - Years: 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021
Part: Checks and maintenance

See other generations:
Video tutorial

To replace the tailgate motor on the Volkswagen Sharan, loosen the screws securing the panel in place. Once the screws are loosened, detach the panel and locate the underlying components.

The motor can then be released from the screws holding it and the associated power cables. This will allow you to insert the new motor into its housing, connect it to the appropriate cables, and secure it in place with the screws.


Updated on 20 October 2026 by ScegliAuto


Related tutorials

How to replace the door of the VW Sharan 2
How to replace the door of the VW Sharan 2
Volkswagen Sharan (2010-2023 / 7N, MK 2) Today we will explain how to replace the sliding door of the Volkswagen Sharan model 2. Open the sliding door and remove the lower side cover so that…
Replacement of the motor and window lift mechanism of the Volkswagen Sharan.
Replacement of the motor and window lift mechanism of the Volkswagen Sharan.
Volkswagen Sharan (2010-2023 / 7N, MK 2) Today we will discover the main instructions that will allow us to disassemble and replace the window motor and mechanism of the Volkswagen Sharan. F…
How to Remove Starter Motor on Sharan
How to Remove Starter Motor on Sharan
Volkswagen Sharan (1995-2010 / 7M, MK 1) How to remove the starter motor from the Sharan? Remove the damaged starter motor to replace it with a new one. Lift the front bonnet to access the s…

    Frequently Asked Questions

    • Sharan 2010-2023 - Where is the jack of the Volkswagen Sharan located? Read answer

How to Reset the Tire Pressure Light on a MG ZS?

On the instrument cluster of the MG ZS, the tire pressure light that appears can be reset by inflating the tires to the correct pressure: this value will be indicated on the sticker attached to the driver's door pillar. Once the tires have been properly inflated, you can turn on the instrument cluster and navigate through the menu until you find the option that indicates tire pressure: if this screen shows the new values, the light will turn off; otherwise, you will need to drive for a few miles so that the sensors can read the new values and turn off the light afterward.

Watch the video!


by ScegliAuto

More videos