Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacement of the motor and window lift mechanism of the Volkswagen Sharan.

Model: Volkswagen Sharan 7N, MK 2 - Years: 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021

See other generations:
Video tutorial

Today we will discover the main instructions that will allow us to disassemble and replace the window motor and mechanism of the Volkswagen Sharan. First, we open the vehicle door and begin to disassemble and remove the door panel; then we unscrew the screws of the window mechanism and the side window, removing the latter first.

At this point, we disconnect the electrical connector of the window motor, removing the entire mechanism along with it; then we reassemble the door components, finally installing the interior trim!


Posted on 30 April 2025 by ScegliAuto


Related tutorials

How to disassemble the door panel of the Volkswagen Sharan
How to disassemble the door panel of the Volkswagen Sharan
Volkswagen Sharan (2010-2023 / 7N, MK 2) The instructions in this guide will show us how to disassemble and remove the front door panel of the Volkswagen Sharan. First, we open the front doo…
How to replace the door of the VW Sharan 2
How to replace the door of the VW Sharan 2
Volkswagen Sharan (2010-2023 / 7N, MK 2) Today we will explain how to replace the sliding door of the Volkswagen Sharan model 2. Open the sliding door and remove the lower side cover so that…
Replacing the Window Switch Panel
Replacing the Window Switch Panel
Volkswagen Sharan (1995-2010 / 7M, MK 1) The first step to replace the window switch panel in your car is to buy a new one. Following this guide, the replacement procedure can be carried out…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos