Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Window Switch Panel

Model: Volkswagen Sharan 7M, MK 1 - Years: 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006
Part: Push button

See other generations:
Video tutorial

The first step to replace the window switch panel in your car is to buy a new one. Following this guide, the replacement procedure can be carried out without causing damage and with minimal effort, taking not much time. To access the motor, remove the door cover panel by unscrewing the screws located in the handle area and in the section housing the window switch buttons.

Then disconnect the connectors at the base of the buttons and remove the internal cover of the rearview mirror that is at the base of the pivot and is useful for its adjustment. Next, disconnect the electrical wires powering it, being careful not to damage them with abrupt movements, and then move to the mechanical arm that supports the glass, which is attached to the glass via a plastic support.

Once the glass is freed, support it to prevent it from falling and secure it with the help of a screwdriver.


Updated on 14 February 2026 by ScegliAuto


Related tutorials

Fuse Box of the Volkswagen Sharan
Volkswagen Sharan (2010-2023 / 7N, MK 2) If you want to know the location of the fuses on this car, the following description provides guidance on their identification. All fuses are located…
Removing the Switch Panel from the Door Panel of the VW Sharan
Removing the Switch Panel from the Door Panel of the VW Sharan
Volkswagen Sharan (1995-2010 / 7M, MK 1) See how to remove the switch panel located above the door panel of a VW Sharan. Disconnect the battery terminals from the engine bay before disconnec…
Instructions for Removing the Door Panel
Instructions for Removing the Door Panel
Volkswagen Sharan (1995-2010 / 7M, MK 1) To remove the door panel, first remove the trim moulding of the panel itself (in this case with an aluminium effect finish) and the internal cover of…

Other guides you may be interested in

How to Reset the Tire Pressure Light on a MG ZS?

On the instrument cluster of the MG ZS, the tire pressure light that appears can be reset by inflating the tires to the correct pressure: this value will be indicated on the sticker attached to the driver's door pillar. Once the tires have been properly inflated, you can turn on the instrument cluster and navigate through the menu until you find the option that indicates tire pressure: if this screen shows the new values, the light will turn off; otherwise, you will need to drive for a few miles so that the sensors can read the new values and turn off the light afterward.

Watch the video!


by ScegliAuto

More videos