Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Interior Rear View Mirror on a Volkswagen Jetta

Model: Volkswagen Jetta MK 6, A6 - Years: 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018
Part: Rearview mirror

See other generations:
Video tutorial

To replace the interior rear view mirror on a Volkswagen Jetta, grasp the mirror by the base and detach it from the support fixed to the windscreen, releasing it from the locking system. Once removed, check the metal support already glued to the glass.

To fit the new mirror, position it on the support and press upwards until the locking mechanism at the bottom clicks into place. Ensure that the click secures the mirror correctly in position.

Next, connect any electrical wires and insert the plastic cover that conceals the cables, sliding it into place until fully seated.


Posted on 5 September 2026 by ScegliAuto


Related tutorials

How to Remove the Interior Rear-View Mirror of the Volkswagen Jetta Mk5
How to Remove the Interior Rear-View Mirror of the Volkswagen Jetta Mk5
Volkswagen Jetta (2005-2010 / MK 5, A5) This guide shows how to remove the interior rear-view mirror of the Volkswagen Mk5. The removal of the interior rear-view mirror of the Volkswagen Je…
Guide to replacing the interior rearview mirror of the Volkswagen Jetta
Guide to replacing the interior rearview mirror of the Volkswagen Jetta
Volkswagen Jetta (2010-2018 / MK 6, A6) Today we will discover the instructions that will allow us to disassemble and replace the internal rearview mirror of the Volkswagen Jetta. First of …
Removing the Wing Mirror of a Volkswagen Jetta
Removing the Wing Mirror of a Volkswagen Jetta
Volkswagen Jetta (2010-2018 / MK 6, A6) Remove the wing mirror from a Volkswagen Jetta. Use a plastic-coated lever (rubber) to pry between the perimeter of the mirror frame and the glass. P…

How to Open the Bonnet on the Mitsubishi L200?

In this tutorial, you will see how to open the bonnet on the Mitsubishi L200, a very simple operation that follows the standard procedure. First, open the vehicle and go to the driver's side, then locate the lever at the lower outer area, just in front of the pedals, and pull it. Next, position yourself in front of the bonnet, locate the second lever above the Mitsubishi logo, and push it to the right, releasing the latch. At this point, you can fully lift the bonnet and secure it with the prop rod.

Watch the video!


by ScegliAuto

More videos