Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Volkswagen
    3. :
  3. Jetta
    4. : How to remove the interior rear view mirror of the Volkswagen Jetta Mk5

Volkswagen Jetta - Video tutorial

Model: Volkswagen Jetta MK 5, A5 - Years 2005-2010
Part: Interior rearview mirror
Operation: How to remove the interior rear view mirror of the Volkswagen Jetta Mk5

The guide shows how to remove the interior rear view mirror of the Volkswagen Mk5. Removing the interior rear view mirror of the Volkswagen Jetta is done very quickly and easily. Furthermore, since it is an interlocking mounted element, no equipment of any kind is required. In fact, it is necessary to firmly grip the shaft of the optical group and, with a clockwise twist, disengage the mirror block. Now you can remove the old element. To reassemble the mirror simply insert the mirror into position and rotate it counterclockwise to lock it in place.


Posted on 10 April 2024 by ScegliAuto



Removal of the exterior rear view mirror of the Volkswagen Jetta Mk5 - Golf 5
Volkswagen Jetta (2005-2010 / MK 5, A5) In today's video we will see how to disassemble and replace the external rear view mirror of the Volkswagen Jetta fifth series, but also of the Golf
Removing the mirror from the exterior mirror of a Volkswagen Jetta
Volkswagen Jetta (2010-2018 / A6, MK 6) Let's see the disassembly of the exterior mirror mirror of a Volkswagen Jetta. With a lever with a plastic (rubber) coating, we go to pry between the
Removing the external rear-view mirror
Volkswagen Jetta (2005-2010 / MK 5, A5) To be able to disassemble the external rear-view mirror, it is first necessary to remove the door panel: then unscrew the screws along the edge of th

Fiat Ducato 2.8 JTD gearbox oil replacement

Let's see in this guide the main steps to be able to change the transmission oil of the second series Fiat Ducato, with 2.8 JTD engine. First of all we lift the car and go to locate the gear oil vent bolt, which we find near the transmission; we use a hex wrench to unscrew it, letting it drain the old oil in a container for about ten minutes. At this point we open the bonnet and remove the air intake sleeve, so as to be able to access the gearbox oil filling hole; then we fill up to the maximum level!

Watch the video!


by ScegliAuto

More videos