Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Volkswagen
    3. :
  3. Tiguan
    4. : How do you replace the fog light bulb on the Volkswagen Tiguan?

Volkswagen Tiguan - Video tutorial

Model: Volkswagen Tiguan AD, MK 2, BW - Years 2016-2024
Part: Fog lights
Operation: How do you replace the fog light bulb on the Volkswagen Tiguan?

In order to replace the fog light bulb of the Volkswagen Tiguan, you need to loosen the screws that secure the inner cover of the corresponding wheel arch: once this cover has been removed, it will be possible to remove the bulb from the inside of the corresponding headlight by disconnecting its connector. At this point, you can connect the new replacement bulb to the appropriate connector, inserting it into the corresponding headlight. Then, you can reattach the inner cover of the corresponding wheel arch, making sure that everything is functioning correctly.


Posted on 7 September 2023 by ScegliAuto



Replacement of the front fog light bulb of the Volkswagen Tiguan
Volkswagen Tiguan (2007-2016 / MK 1, 5N) Below we will see the instructions that will allow us to disassemble and replace the front fog light bulb of the Volkswagen Tiguan. To access the fog
How to replace the front fog light of the Volkswagen Tiguan.
Volkswagen Tiguan (2007-2016 / MK 1, 5N) Today we will see, in this short and simple guide, how to disassemble and replace the front fog light or its bulb on the Volkswagen Tiguan. First of
Replacing the fog light on Volkswagen Tiguan
Volkswagen Tiguan (2016-2024 / AD, MK 2, BW) Bye! Today we show you how to replace the front fog light bulb on Volkswagen Tiguan. Rotate the wheel on the affected light side as far as possible t

Other guides that may interest you

How to reset the oil service in the Fiat Toro?

In this tutorial we can see how to reset the oil service in the Fiat Toro. Before carrying out this simple and quick operation, make sure that you have completed any required maintenance work. We start by inserting the key but leaving it in the initial position, after which we keep the accelerator pedal fully depressed and at the same time turn on the instrument panel. At this point, always keeping the accelerator pressed, press the brake pedal 5 consecutive times and, with the pedals in position, turn off the ignition. We check that the procedure has been successful by starting the vehicle.

Watch the video!


by ScegliAuto

More videos