Do it yourself
Frequently asked questions about cars and motorcycles

Issue with the Rear Hatch of the Volkswagen Golf Estate or Passat

Model: Volkswagen Golf MK 5, Golf 5, Golf V - Years 2003-2008
Part: Checks and maintenance

If the lock on the rear hatch of the Volkswagen Golf Estate or Passat is fine, as well as the cable and fuse, the problem may be with the button. More specifically, the issue lies in the wire. When opening the hatch, look at the top left; you will see a rubber tube. You will need to pull it out, remove the insulation from the wire, and you will see that among them, there is a wire almost cut. The power cable for the hatch button is the smallest wire. You will need to put new insulation on all the wires and insulate the cut one, using a heat shrink connector for this.

Updated on 19 August 2026 by ScegliAuto

Video tutorial

Related tutorials

Volkswagen Golf (2012-2019 / Golf VII, MK 7, Golf 7) In this video we can see how to remedy the problem of the trunk of the Volkswagen VII that has filled with water; this is due to a break in a part of…
Volkswagen Golf (2012-2019 / Golf VII, MK 7, Golf 7) In your Volkswagen Golf, the boot may become stuck due to a fault in the lock or the control button located in the cabin. In this case, you can perfo…
Volkswagen Golf (2012-2019 / Golf VII, MK 7, Golf 7) This tutorial explains how to overcome a common issue with Volkswagen cars, in this case, the Golf 7, where the side flap of the fuel filler neck get…

    Frequently Asked Questions

    • Golf 2012-2019 - Why does the rear hatch of the Volkswagen Golf not open? Read answer
    • Golf 2008-2012 - How often should the Volkswagen Golf 6 be serviced? Read answer
    • Golf 2012-2019 - How many km are the coupons for the Volkswagen Golf? Read answer
    • Golf 1997-2003 - Why does the Volkswagen Golf 4 temperature gauge not work? Read answer
    • Golf 2003-2008 - Where is the fuel pump relay on my Golf 5 located? Read answer

How to Remove the Front Bumper of the Citroën C4 Picasso?

To remove the front bumper of the Citroën C4 Picasso, you need to take out all the rivets and screws that secure the piece to its housing: these screws are located inside the wheel arches of the front wheels and at the central upper part of the bumper itself. Once all these fastening elements have been removed, you can detach the bumper from its seat by disconnecting the connectors inside and then insert the new replacement part. The new part can then be secured and connected properly, ensuring it is correctly fixed in place.

Watch the video!


by ScegliAuto

More videos