Do it yourself
Frequently asked questions about cars and motorcycles

How to solve the problem of the Volkswagen Golf VII trunk full of water

Model: Volkswagen Golf Golf VII, MK 7, Golf 7 - Years 2012-2019
Part: Checks and maintenance

In this video we can see how to remedy the problem of the trunk of the Volkswagen VII that has filled with water; this is due to a break in a part of the bodywork. The water passes filling the rear cavity and then enters the trunk. To solve the problem we will have to remove the bumper and clean the air intakes - or buy new ones and replace them - but first we will have to drain the water from underneath (as the youtuber shows us, going under the car to show us the water drainage hole) so that the car does not have an unpleasant moldy smell inside.

Posted on 24 December 2024 by ScegliAuto

Video tutorial

Related tutorials

Volkswagen Golf (2012-2019 / Golf VII, MK 7, Golf 7) In this video, learn how to solve the radiator blockage problem on a Volkswagen Golf. The heating radiator is located beneath the steering column, ne…
Volkswagen Golf (2012-2019 / Golf VII, MK 7, Golf 7) The indicated area is one of the most common critical points for water ingress in the Golf VII and many other cars from the VAG group: typically, wat…
Volkswagen Golf (2012-2019 / Golf VII, MK 7, Golf 7) What to do if the water temperature of a Volkswagen Golf VII rises above 90°? In this video, it was possible to find the fault after performing some …

    Frequently Asked Questions

    • Golf 2012-2019 - Why does the rear hatch of the Volkswagen Golf not open? Read answer
    • Golf 2008-2012 - How often should the Volkswagen Golf 6 be serviced? Read answer
    • Golf 2012-2019 - How many km are the coupons for the Volkswagen Golf? Read answer
    • Golf 1997-2003 - Why does the Volkswagen Golf 4 temperature gauge not work? Read answer
    • Golf 2003-2008 - Where is the fuel pump relay on my Golf 5 located? Read answer

How to Reset the Tyre Pressure Light on the Opel Grandland X

While driving, if you notice the tyre pressure warning light coming on, first check the actual inflation pressure of the tyres and, if necessary, restore the pressures recommended by the manufacturer. After restoring the correct pressures, you need to reset the warning light that has illuminated on the instrument cluster. To do this, locate the reset button on the lower central console. Press this button and hold it down for at least 3 seconds, after which the low pressure indication will turn off.

Watch the video!


by ScegliAuto

More videos