Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Seatbelt on a Volkswagen Tiguan

Model: Volkswagen Tiguan 5N, MK 1 - Years 2007-2016
Part: Checks and maintenance

To replace the seatbelt on a Volkswagen Tiguan, use a tool to pry off the plastic cover of the door pillar corresponding to the seatbelt being replaced. This will allow you to locate the reel around which the seatbelt is wound at the bottom, loosening all the fixing screws. Next, identify the pin that secures the seatbelt at its upper part, which can also be loosened, completely detaching the seatbelt; you can now replace it with a new one, securing it properly with the screws.

Updated on 30 August 2026 by ScegliAuto

Video tutorial

Related tutorials

How to disable the seatbelt alarm in VAG group cars.
How to disable the seatbelt alarm in VAG group cars.
Volkswagen Tiguan (2007-2016 / 5N, MK 1) In this video, we can see how to disable the warning sound for an unbuckled seatbelt in a vehicle from the V.A.G. group (which includes Volkswagen, A…
How to activate and deactivate the alarm system of the Volkswagen Tiguan
How to activate and deactivate the alarm system of the Volkswagen Tiguan
Volkswagen Tiguan (2007-2016 / 5N, MK 1) The following steps will show us how to activate and deactivate the alarm system of the Volkswagen Tiguan. First, we open the front door on the drive…
How to deactivate the anti-theft system on the Volkswagen Tiguan
How to deactivate the anti-theft system on the Volkswagen Tiguan
Volkswagen Tiguan (2007-2016 / 5N, MK 1) The steps outlined in this guide will show us how to activate and deactivate the alarm system through the dedicated button on the Volkswagen Tiguan. …

Other guides you may be interested in

    Frequently Asked Questions

    • Tiguan 2016-2025 - What to do in case of ignition problems in a Volkswagen Tiguan? Read answer

How to Remove the Headrests from a Fiat Panda

Below are the instructions to remove the headrests, both front and rear, from the Fiat Panda. First, get inside the vehicle and press and hold the side button located at the base of the headrest. Then, while holding the button, pull the headrest upwards to remove it, as shown in the video. At this point, perform the same operation on the other headrests. Now, simply insert them back in while holding the button, and finally adjust the height of all the headrests!

Watch the video!


by ScegliAuto

More videos