Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Where is the Comfort Control Module on a Volkswagen Touran?

Model: Volkswagen Touran MK 1, 1T - Years 2003-2015
Part: Control unit

The comfort control module on a Volkswagen Touran is located inside the dashboard. To access it, you will need to remove all the trim panels and necessary components. Start by detaching the central tunnel trim, then remove the side trim of the passenger footwell. At this point, loosen the screws securing the glove compartment, completely remove it, and access the module located behind it. This can be disconnected from the corresponding connectors to insert the new one and reinstall all removed parts.

Updated on 3 September 2026 by ScegliAuto

Video tutorial

Related tutorials

Where are the fuses located in the Volkswagen Touran?
Where are the fuses located in the Volkswagen Touran?
Volkswagen Touran (2003-2015 / MK 1, 1T) The fuses in the Volkswagen Touran are located inside two fuse boxes installed within the vehicle: the first box is found inside the cabin, behind th…
Where to Find the Internal Fuse Box of the Volkswagen Touran
Where to Find the Internal Fuse Box of the Volkswagen Touran
Volkswagen Touran (2003-2015 / MK 1, 1T) Today, this guide shows you where to find the internal fuse box of the Volkswagen Touran, following the instructions below. First, get inside the cab…
Where to Find the Fuse Box on a Volkswagen Touran Mk2
Where to Find the Fuse Box on a Volkswagen Touran Mk2
Volkswagen Touran (2015-2024 / 5T, MK 2) In the event of electrical faults affecting one or more components in your Volkswagen Touran Mk2, you will need to address the respective fuses. With…

Other guides you may be interested in

How to Connect the Cables to the Battery of the Citroen Xsara Picasso?

In this tutorial, you will see how to connect the cables to the battery of the Citroen Xsara Picasso, useful if you need to recharge it or perform an emergency start. First, ensure the key is not inserted, then open the bonnet and move to the front of the left headlamp. Next, locate the bolt just behind the filter box and connect the positive terminal clamp to it. Now you can connect the negative terminal to any point on the chassis, such as the indicated point. Once the operation is complete, ensure you disconnect the negative first and then the positive.

Watch the video!


by ScegliAuto

More videos