Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Rear Light Bulb in a VW Golf

Model: Volkswagen Golf MK 7, Golf 7, Golf VII - Years: 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019
Part: Tail light bulb

See other generations:
Video tutorial

Replacing the rear light bulb in the Volkswagen Golf 7 is necessary to continue driving the vehicle safely. Start by opening the boot; on this model from 2012, the bulb is located on the tailgate.

Remove the cover on the tailgate and disconnect the connector. Finish the removal by turning the bulb counterclockwise to extract it. For installation, follow the same procedure in reverse.

The same procedure applies for replacing the left rear light bulb.


Updated on 7 September 2026 by ScegliAuto


Related tutorials

How to Remove the Rear Light from a Volkswagen Golf
How to Remove the Rear Light from a Volkswagen Golf
Volkswagen Golf (2003-2008 / Golf 5, MK 5, Golf V) In this guide, discover how to remove and replace the rear light, along with the bulbs, of the Volkswagen Golf. First, open the boot lid and start un…
How to Remove the Rear Headlamp of the Volkswagen Golf 6
How to Remove the Rear Headlamp of the Volkswagen Golf 6
Volkswagen Golf (2008-2012 / Golf 6, MK 6, 5K1, Golf VI) To remove the rear headlamp of the Volkswagen Golf 6, open the boot to access the components inside the luggage compartment. Detach the internal lini…
How to Replace the Rear Light Bulbs on a Volkswagen Golf
How to Replace the Rear Light Bulbs on a Volkswagen Golf
Volkswagen Golf (2012-2019 / MK 7, Golf 7, Golf VII) Below, you will find instructions on how to remove and replace the rear light and its bulbs on a Volkswagen Golf. First, open the rear hatch and star…

How to Replace the Glow Plugs in the Fiat Ducato 2.3 Multijet?

Glow plugs, as the name suggests, raise the temperature of the engine in diesel vehicles to allow for easier starting. The manufacturer, in this case, Fiat for the Ducato 2.3 Multijet, specifies how often they should be replaced, and a warning light will illuminate when it's time. This work is carried out under the bonnet. First, remove the upper engine cover, then lift the coil and, using a socket wrench of the appropriate size, unscrew the glow plug to remove it from the base, followed by installing the new one.

Watch the video!


by ScegliAuto

More videos