Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Rear Light from a Volkswagen Golf

Model: Volkswagen Golf MK 5, Golf 5, Golf V - Years 2003-2008
Part: Tail light

In this guide, discover how to remove and replace the rear light, along with the bulbs, of the Volkswagen Golf. First, open the boot lid and start unscrewing the plastic screw of the rear light, then disconnect the electrical connector of the bulbs. Remove the light unit from the outside as shown in the video. At this point, if necessary, replace the bulbs with new ones of the correct type; insert them properly and reassemble the rear light unit by following the reverse procedure!

Updated on 17 June 2026 by ScegliAuto

Video tutorial

Related tutorials

How to disassemble the rear headlight of the Volkswagen Golf
How to disassemble the rear headlight of the Volkswagen Golf
Volkswagen Golf (2012-2019 / Golf VII, MK 7, Golf 7) The steps to remove the rear light of the Volkswagen Golf model MK 7 are simple and quick to perform independently and do not require the use of any …
How to remove the third brake light of the Volkswagen Golf
How to remove the third brake light of the Volkswagen Golf
Volkswagen Golf (2003-2008 / MK 5, Golf 5, Golf V) The following steps will show us how to disassemble and replace the third brake light and its bulbs on a Volkswagen Golf. First, move to the back and…
Replacement of the Volkswagen Golf stop light bulb
Replacement of the Volkswagen Golf stop light bulb
Volkswagen Golf (2003-2008 / MK 5, Golf 5, Golf V) In a few simple steps, we will see how to disassemble and replace the stop light bulb of the rear light of the Volkswagen Golf. First, open the rear …

How to Reset the Tyre Pressure Light on the Opel Grandland X

While driving, if you notice the tyre pressure warning light coming on, first check the actual inflation pressure of the tyres and, if necessary, restore the pressures recommended by the manufacturer. After restoring the correct pressures, you need to reset the warning light that has illuminated on the instrument cluster. To do this, locate the reset button on the lower central console. Press this button and hold it down for at least 3 seconds, after which the low pressure indication will turn off.

Watch the video!


by ScegliAuto

More videos