Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Perform the Auto Test on the Volkswagen Climatronic

Model: Volkswagen Volkswagen Various
Part: Air conditioning

Video tutorial

In this video, see how to perform the auto test on the Volkswagen Climatronic: press both buttons located at the far right and left of the controls simultaneously, then turn on the instrument cluster. Once this operation is done, you can release both buttons at the same time.

A test of the unit’s functionality will begin, visible on the display and also verifiable by the sound of the fan running at maximum speed. You can adjust the fan speed with the red and blue buttons: theoretically, the red button increases the speed, while the blue button decreases it. Pressing the "Econ" button resets and returns to normal conditions.


Updated on 14 September 2026 by ScegliAuto


Related tutorials

How the Volkswagen Climatronic Works
How the Volkswagen Climatronic Works
Volkswagen Volkswagen Various In this video, we detail the controls of the Volkswagen Climatronic: To activate it, press the button on the right that says "A/C". The "AUTO" functi…
How to Reset and Calibrate the HVAC Flaps on Volkswagen Climatronic?
How to Reset and Calibrate the HVAC Flaps on Volkswagen Climatronic?
Volkswagen Volkswagen Various To reset and calibrate the HVAC flaps on a Volkswagen Climatronic, use the buttons on the central console. Press and hold the air button directed at …
How do you reset the Climatronic of Volkswagen?
How do you reset the Climatronic of Volkswagen?
Volkswagen Volkswagen Various The reset of the Climatronic on board Volkswagen can be done by turning on the instrument panel, so that it is possible to use the controls located o…

How to replace the handbrake button on the Opel Mokka?

The handbrake button on the Opel Mokka can be replaced without going to a mechanic. The installation system is snap-fit with plastic clips and does not require special tools. First, remove the old button, possibly using a flat screwdriver to pry it off. Next, check for any fragments and remove them using tweezers if necessary. At this point, install the new button by placing it in its seat and applying light pressure to snap the clips into place.

Watch the video!


by ScegliAuto

More videos