Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How Does the Speed Limiter Work on the 2016 VW Polo?

Model: Volkswagen Polo 6R, MK V, Polo 5, Polo V, MK 5 - Years: 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017
Part: Onboard computer

See other generations:
Video tutorial

On the new Volkswagen Polo models produced since 2016, there is an option for a speed limiter that can be set for driving. This speed limit can be adjusted as needed.

To change the speed limit, press the small red lever located near the instrument cluster. Once pressed, set the desired limit.

As you reach this limit, the display will start to flash, and an audible signal, if present, will activate to indicate that you need to slow down.


Updated on 1 October 2026 by ScegliAuto


Related tutorials

How to set the cruise control on the Volkswagen Polo
How to set the cruise control on the Volkswagen Polo
Volkswagen Polo (2009-2017 / 6R, MK V, Polo 5, Polo V, MK 5) This guide provides instructions that will allow you to set and use the cruise control system on the Volkswagen Polo. To enable the cruise control sy…
How the Air Conditioning Works on the Polo
How the Air Conditioning Works on the Polo
Volkswagen Polo (2001-2009 / MK IV, Polo 4, 9N, MK 4, Polo IV) The air conditioning controls are located in the central console of the dashboard: on the left is the temperature selector (hot/cold), in the centre …
How to Use Cruise Control in the Volkswagen Polo?
How to Use Cruise Control in the Volkswagen Polo?
Volkswagen Polo (2009-2017 / 6R, MK V, Polo 5, Polo V, MK 5) In this tutorial, you will learn how to use the Cruise Control in the Volkswagen Polo, a very simple and quick operation. This system should only be …

How to reset the Service light on a 2019 Jeep Renegade?

The Service light, depicted as a yellow spanner, illuminates as scheduled to remind the driver that it is time for scheduled maintenance. This means that the set mileage has been reached, or the expected time has passed. The procedure involves turning on the instrument cluster, pressing the accelerator three times, and then turning off the ignition. After this, keep the brake pressed, turn the ignition back on, and then turn it off again. Upon the next ignition, you will notice that the light has been reset.

Watch the video!


by ScegliAuto

More videos