Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the lower bumper of the VW Golf 8

Model: Volkswagen Golf Golf 8, MK 8, Golf Viii - Years 2019-2026
Part: Rear bumper

With the help of the following video, we will explain the steps to replace the lower bumper of the Volkswagen Golf model mk8. The first step is to lift the vehicle in order to have a better view and space for the removal of the Torx screws. The second step is to unscrew the screws located on the bottom and under the fender, using a 25mm Torx key for the first two and then a 15mm key. The third step is to push the clips downwards in order to remove the lower bumper. Then proceed to remove the rear bumper with the same steps. The fourth step is to insert the new bumper and push the clips. The fifth step is to screw all the screws. Proceed in the same way for the insertion of the front bumper.

Posted on 16 June 2024 by ScegliAuto

Video tutorial

Related tutorials

Removing the Front Bumper of the Volkswagen Golf
Removing the Front Bumper of the Volkswagen Golf
Volkswagen Golf (2003-2008 / MK 5, Golf 5, Golf V) Today, we will discover the instructions that will allow you to remove and replace the front bumper of the Volkswagen Golf in simple steps. First, op…
Removing the Front Bumper on the Volkswagen Golf 5
Removing the Front Bumper on the Volkswagen Golf 5
Volkswagen Golf (2003-2008 / MK 5, Golf 5, Golf V) In today's video tutorial, you will see the instructions on how to remove the front bumper on the fifth series Volkswagen Golf in simple and quick st…
Fitting the Lower Bumper Trim
Fitting the Lower Bumper Trim
Volkswagen Golf (1997-2003 / Golf IV, MK 4, Golf 4) The front bumper has a lower trim applied through snap-fit plastic tabs: to secure it, simply align the tabs of the trim with the respective slots un…

Other guides you may be interested in

How to Connect the Cables to the Battery of the Citroen Xsara Picasso?

In this tutorial, you will see how to connect the cables to the battery of the Citroen Xsara Picasso, useful if you need to recharge it or perform an emergency start. First, ensure the key is not inserted, then open the bonnet and move to the front of the left headlamp. Next, locate the bolt just behind the filter box and connect the positive terminal clamp to it. Now you can connect the negative terminal to any point on the chassis, such as the indicated point. Once the operation is complete, ensure you disconnect the negative first and then the positive.

Watch the video!


by ScegliAuto

More videos