Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to set up the navigation system in the Volkswagen T-Roc

Model: Volkswagen T Roc MK 1 - Years 2017-2025
Part: Accessory kit

To set up the Volkswagen T-Roc navigator, start by turning on the instrument panel or just the car's infotainment system, insert the SD card into its slot in the glove compartment, close the glove compartment and operate from the infotainment system: press the "nav" label on the side of the screen to access the map, at the bottom of the screen we notice that as we approach our hand, various shortcuts appear and at the end we find the "setup" label to customize or configure the map. To set up navigation, press the "new dest." label, enter the address of the destination and notice that as we type, a dropdown menu may appear at the top with the suggestion of the address, we select it if it is correct and then click on the "start" label to begin navigation.

Posted on 20 June 2024 by ScegliAuto

Video tutorial

Related tutorials

How to Use and Set the Navigation System of the Volkswagen T-Roc
How to Use and Set the Navigation System of the Volkswagen T-Roc
Volkswagen T Roc (2017-2025 / MK 1) In this guide, you will learn how to use and set the navigation system of the Volkswagen T-Roc. First, get inside the vehicle and start the ignition …
How to Use the Navigation System on Volkswagen T-Roc
Volkswagen T Roc (2017-2025 / MK 1) This video demonstrates how to use the navigation system on the Volkswagen T-Roc. Turn on the instrument panel with the appropriate key (card), then …
How to Activate Navigation and App Connect on a Volkswagen T-Roc
How to Activate Navigation and App Connect on a Volkswagen T-Roc
Volkswagen T Roc (2017-2025 / MK 1) Let's see how to activate the navigation and App Connect on a Volkswagen T-Roc MIB3: access the shop from the car via the infotainment system. Inside…

How to Connect the Cables to the Battery of the Citroen Xsara Picasso?

In this tutorial, you will see how to connect the cables to the battery of the Citroen Xsara Picasso, useful if you need to recharge it or perform an emergency start. First, ensure the key is not inserted, then open the bonnet and move to the front of the left headlamp. Next, locate the bolt just behind the filter box and connect the positive terminal clamp to it. Now you can connect the negative terminal to any point on the chassis, such as the indicated point. Once the operation is complete, ensure you disconnect the negative first and then the positive.

Watch the video!


by ScegliAuto

More videos