Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How do you replace the timing belt of the Volkswagen Transporter?

Model: Volkswagen Transporter MK 6, T6 - Years 2014-2025
Part: Timing belt

In order to replace the timing belt of the Volkswagen Transporter, you need to first loosen the screws that secure the front right wheel of the vehicle, and then loosen the screws that secure the corresponding wheel arch. This will allow you to access the screws that secure the belt tensioner pulley, which can be loosened by removing this piece. By doing this, the tension of the belt will be reduced and you will be able to remove it from its housing and replace it with a new spare part. After the replacement, you can reassemble all the other parts that were removed.

Posted on 31 July 2024 by ScegliAuto

Video tutorial

Related tutorials

Replacing the Timing Belt on the Volkswagen Transporter
Replacing the Timing Belt on the Volkswagen Transporter
Volkswagen Transporter (1990-2003 / T4, MK 4) This guide shows you the main steps to remove and replace the timing belt on the Volkswagen Transporter with a diesel engine. First, lift the vehicle…
Replacing the Timing Belt on the Volkswagen Transporter 1.9 TD
Replacing the Timing Belt on the Volkswagen Transporter 1.9 TD
Volkswagen Transporter (1990-2003 / T4, MK 4) Below, we will discover the instructions on how to remove and replace the timing belt on the Volkswagen Transporter 1.9 TD. First, open the bonnet an…
How do you replace the timing belt of the Volkswagen Transporter?
How do you replace the timing belt of the Volkswagen Transporter?
Volkswagen Transporter (2003-2014 / T5, MK 5) The timing belt of the Volkswagen Transporter can be replaced by lifting the vehicle so that the right front wheel is not in contact with the ground:…

Other guides you may be interested in

How to Reset the Tyre Pressure Light on the Opel Grandland X

While driving, if you notice the tyre pressure warning light coming on, first check the actual inflation pressure of the tyres and, if necessary, restore the pressures recommended by the manufacturer. After restoring the correct pressures, you need to reset the warning light that has illuminated on the instrument cluster. To do this, locate the reset button on the lower central console. Press this button and hold it down for at least 3 seconds, after which the low pressure indication will turn off.

Watch the video!


by ScegliAuto

More videos