Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Volkswagen Up - Tail light

Tail Light Volkswagen Up (2011-2024 / mk 1)

Volkswagen Up (2011-2024 / MK 1)
Replacement of the rear headlight and bumper of the Volkswagen Up
Below we will see the instructions that will allow us to disassemble and replace the rear taillight and bumper of the Volkswagen Up. First, we open the rear …Read all…
Posted on 7 February 2025 by ScegliAuto
Volkswagen Up (2011-2024 / MK 1)
Replace the Rear Light on VW Up
Do you want to remove the rear light on the VW Up? Let’s see how to remove the rear light. Lift the tailgate, find the cover on the side of the boot and …Read all…
Posted on 5 May 2026 by ScegliAuto
Airbag (1) Shocks (1) Car stereo (7) Battery (6) Spark plugs (5) Body (1) Key (1) Timing belt (11) V-belt (1) Onboard computer (3) Checks and maintenance (17) Dashboard (1) Rear bench seat (1) Headlight (1) Tail light (2) Fog lights (1) Air filter (6) Cabin air filter (12) Oil filter (1) Parking brake (2) Fuel injectors (1) Accessory kit (1) Light bulb (1) Side marker bulb (1) Headlight bulb (21) Tail light bulb (5) Interior dome light bulb (1) License plate light (1) Engine oil (5) Clock (26) Door trim panel (4) Front bumper (1) Brake pads (3) Fuel pump (1) Instrument cluster (3) Wheel (1) Fuse box (33) Seat (1) Brake system (1) Side mirror (2) Warning light – error code (9) (9) Tire pressure warning light (5) Service warning light (84)

How to Connect the Cables to the Battery of the Citroen Xsara Picasso?

In this tutorial, you will see how to connect the cables to the battery of the Citroen Xsara Picasso, useful if you need to recharge it or perform an emergency start. First, ensure the key is not inserted, then open the bonnet and move to the front of the left headlamp. Next, locate the bolt just behind the filter box and connect the positive terminal clamp to it. Now you can connect the negative terminal to any point on the chassis, such as the indicated point. Once the operation is complete, ensure you disconnect the negative first and then the positive.

Watch the video!


by ScegliAuto

More videos