Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How do I move the radio of the Volvo XC70

Model: Volvo Xc70 MK 3 - Years: 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016
Part: Car stereo

See other generations:
Video tutorial

Removing the radio on a Volvo XC70 is a piece of cake, in fact, to carry out the replacement we need to use a flat-head screwdriver and a Torx key. We insert the flat-head screwdriver into the plastic of the gear shift to remove the base, and using a Torx key size 30, we unscrew the two lower screws of the dashboard.

We lift the dashboard and disconnect the connector, using the flat-head screwdriver or a plastic removal tool.

After disconnecting the connector, we remove the radio from its slot. To install the radio, we should follow the reverse procedure.


Posted on 18 April 2025 by ScegliAuto


Related tutorials

How to Replace the Remote Battery in the Volvo XC70?
How to Replace the Remote Battery in the Volvo XC70?
Volvo Xc70 (2000-2007 / MK 2) You can replace the remote battery in the Volvo XC70 by prying open the back of the device with an object like a screwdriver to detach the panel. Onc…
How to Replace the Battery on a Volvo XC70?
How to Replace the Battery on a Volvo XC70?
Volvo Xc70 (2007-2016 / MK 3) To replace the battery on a Volvo XC70, open the bonnet to access the components in the engine bay. Here, locate the battery at the top right of the …
Resetting the Service Light on the Volvo XC70
Resetting the Service Light on the Volvo XC70
Volvo Xc70 (2007-2016 / MK 3) Below are the instructions for resetting the service and regular maintenance light on the Volvo XC70. First, get in the vehicle and turn on the ignit…

How to reset the Service light on a 2019 Jeep Renegade?

The Service light, depicted as a yellow spanner, illuminates as scheduled to remind the driver that it is time for scheduled maintenance. This means that the set mileage has been reached, or the expected time has passed. The procedure involves turning on the instrument cluster, pressing the accelerator three times, and then turning off the ignition. After this, keep the brake pressed, turn the ignition back on, and then turn it off again. Upon the next ignition, you will notice that the light has been reset.

Watch the video!


by ScegliAuto

More videos