Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the coolant reservoir of the Volvo XC70.

Model: Volvo Xc70 MK 2 - Years: 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007

See other generations:
Video tutorial

The instructions provided in this guide will allow us to disassemble and replace the engine coolant reservoir of the Volvo XC70. First, let's open the vehicle's hood and begin unscrewing the screws of the coolant reservoir that we find on the sides; then we disconnect the fluid hose (draining it into a container) and the electrical connector located underneath, as shown in the video.

At this point, we install the new coolant reservoir, connecting it and topping up the new fluid to the maximum level mark.


Posted on 8 December 2025 by ScegliAuto


Related tutorials

How to Bleed the Brake System on a Volvo XC70
How to Bleed the Brake System on a Volvo XC70
Volvo Xc70 (2007-2016 / MK 3) In this video tutorial, you will learn how to bleed the brake system of a Volvo XC70. First, lift the relevant part of the car and remove the wheel b…
How to Replace the Remote Battery in the Volvo XC70?
How to Replace the Remote Battery in the Volvo XC70?
Volvo Xc70 (2000-2007 / MK 2) You can replace the remote battery in the Volvo XC70 by prying open the back of the device with an object like a screwdriver to detach the panel. Onc…
How to Replace the Battery on a Volvo XC70?
How to Replace the Battery on a Volvo XC70?
Volvo Xc70 (2007-2016 / MK 3) To replace the battery on a Volvo XC70, open the bonnet to access the components in the engine bay. Here, locate the battery at the top right of the …

How to reset the Service light on a 2019 Jeep Renegade?

The Service light, depicted as a yellow spanner, illuminates as scheduled to remind the driver that it is time for scheduled maintenance. This means that the set mileage has been reached, or the expected time has passed. The procedure involves turning on the instrument cluster, pressing the accelerator three times, and then turning off the ignition. After this, keep the brake pressed, turn the ignition back on, and then turn it off again. Upon the next ignition, you will notice that the light has been reset.

Watch the video!


by ScegliAuto

More videos