Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Removing the Door Panel on the Volvo V40

Model: Volvo V40 MK 1 - Years 1995-2012
Part: Door trim panel

In this video, you will see how to remove the door panel on the Volvo V40 in simple and quick steps. First, open the front door and start by undoing the screws on the door panel, which are located on the handle and sides; then remove the switch panel by disconnecting the electrical connector underneath, as shown in the video. At this point, pry at the sides to unclip and remove the panel, disconnecting the handle cable located at the back; all that remains is to refit everything by applying the reverse procedure!

Updated on 2 June 2026 by ScegliAuto

Video tutorial

Related tutorials

Removing the Front Door Panel on a Volvo V40 MK2
Removing the Front Door Panel on a Volvo V40 MK2
Volvo V40 (2012-2019 / MK 2) Let's look at the main steps to remove the front door panel on a second-generation Volvo V40. First, open the rear door and obtain a thin plastic lev…
How to Replace the External Wing Mirror on a Volvo V40
How to Replace the External Wing Mirror on a Volvo V40
Volvo V40 (1995-2012 / MK 1) Let’s briefly go through the steps needed to remove and replace the external wing mirror on a Volvo V40. First, open the front door and start removin…
How to replace the external rearview mirror in the Volvo V40?
How to replace the external rearview mirror in the Volvo V40?
Volvo V40 (2012-2019 / MK 2) In this tutorial we can see how to replace the external rearview mirror in the Volvo V40, a very simple and quick operation. First of all, we open th…

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos