Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Removing the Front Door Panel on a Volvo V40 MK2

Model: Volvo V40 MK 2 - Years 2012-2019
Part: Door trim panel

Let's look at the main steps to remove the front door panel on a second-generation Volvo V40. First, open the rear door and obtain a thin plastic lever; then remove the triangular plastic cover and unscrew all the fixing screws found on the door panel using a Torx screwdriver. At this point, start prising the edges of the panel to release it, disconnecting the electric connector for the window lifter and the handle opening cable to finally remove the panel!

Updated on 17 April 2026 by ScegliAuto

Video tutorial

Related tutorials

Removing the Door Panel on the Volvo V40
Removing the Door Panel on the Volvo V40
Volvo V40 (1995-2012 / MK 1) In this video, you will see how to remove the door panel on the Volvo V40 in simple and quick steps. First, open the front door and start by undoing …
How to Replace the External Wing Mirror on a Volvo V40
How to Replace the External Wing Mirror on a Volvo V40
Volvo V40 (1995-2012 / MK 1) Let’s briefly go through the steps needed to remove and replace the external wing mirror on a Volvo V40. First, open the front door and start removin…
How do you reset the tire pressure warning light on the Volvo V40?
How do you reset the tire pressure warning light on the Volvo V40?
Volvo V40 (2012-2019 / MK 2) In order to reset the tire pressure warning light of the Volvo V40, you must first inflate the tires to the correct pressure value: this value is ind…

Where is the Fuel Filter Located in a Volvo XC60?

In this video, you will see where the fuel filter is located in a Volvo XC60 and how to proceed if you need to replace it. As shown, the filter is positioned at the lower part of the engine, right between the left half-shaft and the sway bar attachment. To replace the filter, first, go underneath the vehicle, taking all necessary safety precautions. Then, using an 18mm wrench, open the drain valve and allow any water present to escape. Next, unscrew the housing, remove the old filter, insert the replacement along with a new gasket, and reassemble everything.

Watch the video!


by ScegliAuto

More videos