Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the External Wing Mirror on a Volvo V40

Model: Volvo V40 MK 1 - Years 1995-2012
Part: Side mirror

Let’s briefly go through the steps needed to remove and replace the external wing mirror on a Volvo V40. First, open the front door and start removing the door panel by unscrewing all the fixing screws; then disconnect the electric connector for the window switch, as shown in the video. Next, unscrew the screws of the external wing mirror, disconnecting the electric adjustment connector; then install the new mirror from the outside, securing it from the inside and reassembling the door panel!

Updated on 1 July 2026 by ScegliAuto

Video tutorial

Related tutorials

How to replace the external rearview mirror in the Volvo V40?
How to replace the external rearview mirror in the Volvo V40?
Volvo V40 (2012-2019 / MK 2) In this tutorial we can see how to replace the external rearview mirror in the Volvo V40, a very simple and quick operation. First of all, we open th…
How to Replace the Interior Rear-View Mirror in a Volvo V40?
How to Replace the Interior Rear-View Mirror in a Volvo V40?
Volvo V40 (2012-2019 / MK 2) In this video, you can see how to replace the interior rear-view mirror in a Volvo V40, a very simple and quick operation. First, unclip the small co…
Where is the control unit located in the Volvo V40 2015?
Where is the control unit located in the Volvo V40 2015?
Volvo V40 (2012-2019 / MK 2) If you don't know where the control unit of your Volvo V40 second series (year 2015) is located, don't worry because in the following guide we will d…

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos