Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Interior Rear-View Mirror in a Volvo V40?

Model: Volvo V40 MK 2 - Years: 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019
Part: Rearview mirror

See other generations:
Video tutorial

In this video, you can see how to replace the interior rear-view mirror in a Volvo V40, a very simple and quick operation. First, unclip the small cover located at the back, then completely remove the cover.

Next, grasp the mirror arm and rotate it approximately 90 degrees counterclockwise, unscrewing it from the base. At this point, you can remove the mirror, clean off any adhesive residue, and apply the replacement mirror.

To reposition the mirror onto the base, simply insert it back into the same position from which it was removed and rotate it clockwise.


Updated on 10 May 2026 by ScegliAuto


Related tutorials

How to replace the external rear-view mirror on the Volvo V40?
How to replace the external rear-view mirror on the Volvo V40?
Volvo V40 (2012-2019 / MK 2) In this tutorial, you can see how to replace the external rear-view mirror on the Volvo V40, a very simple and quick operation. First, open the door …
How to Replace the External Wing Mirror on a Volvo V40
How to Replace the External Wing Mirror on a Volvo V40
Volvo V40 (1995-2012 / MK 1) Let’s briefly go through the steps needed to remove and replace the external wing mirror on a Volvo V40. First, open the front door and start removin…
Where are the fuses located in the Volvo V40?
Where are the fuses located in the Volvo V40?
Volvo V40 (2012-2019 / MK 2) In the Volvo V40, the fuses are divided among three fuse boxes installed in the vehicle. The first of these is located below the glove compartment on…

How to Remove the Toll Tag Holder from the Car Windscreen

The toll tag holder is usually attached to the car windscreen to ensure that the toll tag functions immediately when passing through barriers. However, if you decide to remove the holder, you should follow this procedure: - Insert the toll tag into the holder; - Pull the holder inwards to detach it from the windscreen; you can use a glass scraper or a stiff plastic card to assist you; After removing the holder, it is essential to remove the adhesive from the windscreen. To remove the adhesive, we recommend using a solvent-based spray that will remove the glue without clouding the area.

Watch the video!


by ScegliAuto

More videos