Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the TPMS Light on a Volvo V40

Model: Volvo V40 MK 2 - Years 2012-2019
Part: Tire pressure warning light

If the TPMS light on your Volvo V40 keeps coming on without any valid reason, you need to perform a manual reset. Here’s how to do it. First, insert the key and turn on the instrument panel. Next, move to the central control panel and press the "Menu" button. Rotate the knob clockwise to navigate through the menu and select the "My car" option. Press the "OK" button again and then select the "Tyre monitor" option. At this point, select "Start calibration" and press "OK" to confirm the operation. A few moments later, the reset is finally complete.

Updated on 13 July 2026 by ScegliAuto

Video tutorial

Related tutorials

How to reset the tire pressure sensor of the Volvo V40
How to reset the tire pressure sensor of the Volvo V40
Volvo V40 (2012-2019 / MK 2) Today we will see the step-by-step instructions on how to reset the tire pressure warning light (TPMS) of the Volvo V40; before performing the reset,…
How to reset the "Service" light on a Volvo V40?
Volvo V40 (2012-2019 / MK 2) Good morning, today we are here to find out how to reset the "Service" light on our Volvo V40. Let's start by sitting in the driver's seat of the car…
How to Reset the Tyre Pressure Light on the Volvo V40
How to Reset the Tyre Pressure Light on the Volvo V40
Volvo V40 (2012-2019 / MK 2) To reset the tyre pressure light on your Volvo V40 second series (2012-2019), follow these steps. First, enter the cabin and turn on the instrument p…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos