Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Volvo
    3. :
  3. Xc60
    4. : Where is the fuse box of the Volvo XC60 located?

Volvo Xc60 - Video tutorial

Model: Volvo Xc60 MK 1 - Years 2008-2016
Part: Fuse box
Operation: Where is the fuse box of the Volvo XC60 located?

If you still don't know where the fuse box of your first generation Volvo XC60 is located, don't worry because in the following mini guide dedicated to you, you will find all the necessary instructions. First, you need to lift the front hood (after turning off the car and letting the engine cool down sufficiently). Immediately after, locate the fuse box on the right side of the engine compartment and proceed with removing the protective cover. Once you have done this, you will finally have access to all the various fuses of your Volvo XC60 and you can perform any maintenance and/or replacement interventions.


Posted on 29 July 2023 by ScegliAuto

    Frequently Asked Questions

    • Xc60 2017-2024 - Where are the fuses for the electrical sockets of the Volvo XC60 located? Read Answer
    • Xc60 2017-2024 - Where is the fuse box located in the Volvo Xc60? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos