Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Volvo
    3. :
  3. Xc90
    4. : How to reset the service light on the Volvo XC90

Volvo Xc90 - Video tutorial

Model: Volvo Xc90 MK 1 - Years 2002-2014
Part: Instrument cluster
Operation: How to reset the service light on the Volvo XC90

If the maintenance message appears on the instrument panel of your first-generation Volvo XC90, even though the service has already been performed, don't worry because you can reset it using the following procedure. First, enter the cabin and make sure the panel is off, then locate the small button below the speedometer and hold it down. At the same time, insert the key and turn it to position two, then start the panel and wait for the service light to reset. Finally, turn off the panel.


Posted on 12 April 2024 by ScegliAuto

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos