Do it yourself
Frequently asked questions about cars and motorcycles

How to Reset the Service Light on a Volvo

Model: Volvo V40 MK 2 - Years 2012-2019
Part: Warning light – error code

This is a simple and quick operation that allows you to save time and money by avoiding a trip to the garage. Just follow this brief guide to perform the reset yourself. First, insert the key into the ignition and turn it to the on position. Now, press the "T2" button until the service message disappears; holding the button for about five seconds should be sufficient to reset the message.

Updated on 24 February 2026 by ScegliAuto

Video tutorial

Related tutorials

Volvo V40 (2012-2019 / MK 2) To reset the Service light on the Volvo V40, turn the ignition on by rotating the key. Then, press and hold the OK button located at the end of the l…
Volvo V40 (2012-2019 / MK 2) To reset the Service light on a Volvo V40, turn the ignition key to switch on the instrument panel. Then, press and hold the OK button located at the…
Volvo V40 (2012-2019 / MK 2) To reset the Service light on the Volvo V40, turn on the instrument panel by rotating the key in the ignition switch, then press and hold the OK butt…

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos