Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Volvo S60 Fuse Diagram

Model: Volvo S60 MK 2 - Years: 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018
Part: Fuse box

See other generations:
Video tutorial

In this useful video tutorial, you will see all the diagrams accurately detailing the name, location, and operating amperage of each fuse and relay in a second-generation Volvo S60. The first fuse box is located behind the passenger footrest, accessible by removing part of the upholstery under the dashboard as shown in the video.

The second fuse box is located in the engine compartment on the driver's side.

Finally, the last fuse box can be found in the trunk on the left, behind a cover that needs to be removed.


Updated on 5 October 2026 by ScegliAuto


Related tutorials

What is the fuse diagram for the Volvo S60?
What is the fuse diagram for the Volvo S60?
Volvo S60 (2000-2009 / MK 1) In this video, you can see the location of the fuse boxes and their diagrams in the first generation Volvo S60, useful if you need to check the statu…
What is the Fuse Diagram for the Volvo S60?
What is the Fuse Diagram for the Volvo S60?
Volvo S60 (2000-2009 / MK 1) In this video, you can see where the fuse boxes are located in the Volvo S60 and the corresponding diagrams to consult if you need to check the fuses…
Fuse Box and Diagram on a Volvo S60
Fuse Box and Diagram on a Volvo S60
Volvo S60 (2010-2018 / MK 2) This brief tutorial shows all the diagrams of the fuse boxes on a second-generation Volvo S60, specifically produced from 2011 to 2014. In addition t…

Other guides you may be interested in

How to replace the handbrake button on the Opel Mokka?

The handbrake button on the Opel Mokka can be replaced without going to a mechanic. The installation system is snap-fit with plastic clips and does not require special tools. First, remove the old button, possibly using a flat screwdriver to pry it off. Next, check for any fragments and remove them using tweezers if necessary. At this point, install the new button by placing it in its seat and applying light pressure to snap the clips into place.

Watch the video!


by ScegliAuto

More videos