Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Model: Yamaha Xmax 250
Part: Fuse box

The instructions in this guide will show us the positioning and the layout of the fuse boxes of the Yamaha Xmax 250 scooter. First, we put the scooter on the center stand and start disassembling and removing the plastic cover of the front shield; then we will find the battery and the fuse box on the back, where the main fuses are located, as shown in the video. At this point, we use the diagram provided in the vehicle's user manual to locate the fuse layout and diagram, following the video until the end!

Posted on 29 October 2024 by ScegliAuto

Video tutorial

Related tutorials

Fuse box schema and positioning of the Yamaha Xmax 250
Fuse box schema and positioning of the Yamaha Xmax 250
Xmax 250 Below we will see the diagram and positioning of the fuses of the Yamaha Xmax 250 scooter. First, we put our scooter on the center stand and start di…
Where are the Fuses on a Yamaha Xmax 250?
Where are the Fuses on a Yamaha Xmax 250?
Xmax 250 The fuses on a Yamaha Xmax 250 are contained within the dedicated fuse box installed on the vehicle: in this case, the box is located at the rear of …
How to Reset the Service Light on the Yamaha XMax 250
How to Reset the Service Light on the Yamaha XMax 250
Xmax 250 You can manually reset the service light on the dashboard of your Yamaha XMax 250 without any difficulty, even if you are on your own. Follow the ste…

How to Replace the Battery in a Yamaha FZ6?

Replacing the battery in the Yamaha FZ6, as shown in this tutorial, is a very simple and quick operation. First, ensure that the key is not inserted, then remove the rider's seat and, using a 10mm socket spanner, loosen the bolt on the tank hinge. Next, unscrew both the front bolts and the fairing mounting bolts, lift the entire tank, and disconnect both terminals starting with the negative. At this point, you can remove the upper plastic plate, take the battery out of its housing, and fit the replacement.

Watch the video!


by ScegliAuto

More videos