Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Model: Yamaha Nmax 155
Part: Clock

In this tutorial, we can see how to adjust the time on the Yamaha NMAX 155 scooter, a very simple and quick operation to be carried out, for example, after disconnecting the battery or following the switch to daylight saving time. Let's start by inserting the key, then turn on the instrument panel and hold down both buttons on the dashboard until the time starts flashing. We then use the right button to adjust the hour, use the left button to switch to the minutes and, in the same way, adjust them. To save the setting, simply hold down both buttons again.

Posted on 10 February 2025 by ScegliAuto

Video tutorial

Related tutorials

How to adjust the time on the Yamaha NMAX 155 scooter?
How to adjust the time on the Yamaha NMAX 155 scooter?
Nmax 155 .. In this tutorial we can see how to adjust the time on the Yamaha NMAX 155 scooter, an extremely simple and quick operation, to be.. …
How to Set the Time on a Yamaha NMAX 155 Scooter
How to Set the Time on a Yamaha NMAX 155 Scooter
Nmax 155 This tutorial shows how to set the time on a Yamaha NMAX 155 scooter, an extremely simple and quick operation, to be done after disconnecting the bat…
How to adjust the time on the Yamaha NMAX 155 scooter?
How to adjust the time on the Yamaha NMAX 155 scooter?
Nmax 155 .. In this tutorial, we can see how to adjust the time on the Yamaha NMAX 155 scooter, an extremely simple and quick operation to be.. …

How to Check the Coolant Level in a Yamaha Xmax

In the following video, you will learn how to check the coolant level in a 2008 Yamaha Xmax. First, position the motorcycle on a stable surface by raising the stand. Next, lift the cover located at the top of the motorcycle to access the coolant drain bolt. To top up the coolant, unscrew the cap as shown in the video and add the fluid until it reaches the maximum level, indicated as Max. Once finished, close the valve and refit the cover. At this point, start the engine and let it run at idle for a few minutes to eliminate any air bubbles that may have formed inside.

Watch the video!


by ScegliAuto

More videos