Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to set the time on the Yamaha NMax 125

Model: Yamaha Nmax 125
Part: Clock

Video tutorial

If the time displayed on the central panel of your Yamaha NMax 125 is incorrect and you want to manually change it, all you have to do is follow these steps. First of all, make sure the panel is on, then locate the "Menu" button on the left handlebar and press it several times until the hour digits start flashing.

At this point, use the buttons below to change the hours. Once you have done this, press the menu button again to switch to the minutes and repeat the same operation as before.


Posted on 14 March 2025 by ScegliAuto


Related tutorials

How to Set the Time on the Yamaha Nmax 125
How to Set the Time on the Yamaha Nmax 125
Nmax 125 In this guide, we will see the instructions to adjust the clock on the display of the Yamaha Nmax 125 scooter's instrument panel. First, place the sc…
How to Set the Clock on the Yamaha Nmax 125?
How to Set the Clock on the Yamaha Nmax 125?
Nmax 125 To set the clock on the Yamaha Nmax 125, turn on the instrument panel by rotating the appropriate key in the ignition switch. Once the panel is on, p…
How to Reset the Service on the Yamaha NMAX 125 Scooter?
How to Reset the Service on the Yamaha NMAX 125 Scooter?
Nmax 125 In this tutorial, we will see how to reset the service on the Yamaha NMAX 125 scooter, a very simple and quick operation to perform only after comple…

Replacing the Rear Brake Pads of the BMW G310 GS

Follow these brief instructions to remove and replace the rear brake pads (this also applies to the front ones) of the BMW G310 GS motorcycle. First, place the bike on a stand and start by removing the pin and the clip from the rear brake caliper; then remove the old brake pads as shown in the video. Next, clean the caliper of any residual dirt, install the new original brake pads, and secure the pin and clip to lock everything in place, following the video tutorial to the end!

Watch the video!


by ScegliAuto

More videos