Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Model: Yamaha Nmax 125
Part: Clock

To set the clock on the Yamaha Nmax 125, turn on the instrument panel by rotating the appropriate key in the ignition switch. Once the panel is on, press the RESET and SELECT buttons simultaneously until the hour starts to flash. Pressing the RESET button will allow you to change the hours, which can be confirmed by pressing the SELECT button: at this point, the minutes will start to flash, which can be changed using the same procedure. After adjusting the time, you can completely turn off the instrument panel.

Updated on 26 August 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Set the Time on the Yamaha Nmax 125
How to Set the Time on the Yamaha Nmax 125
Nmax 125 In this guide, we will see the instructions to adjust the clock on the display of the Yamaha Nmax 125 scooter's instrument panel. First, place the sc…
How to replace the battery of the Yamaha Nmax 125
How to replace the battery of the Yamaha Nmax 125
Nmax 125 Following these short and simple steps, we will see how to disassemble and replace the battery of the Yamaha Nmax 125 scooter. First of all, put the …
How to Reset the Service on the Yamaha NMAX 125 Scooter?
How to Reset the Service on the Yamaha NMAX 125 Scooter?
Nmax 125 In this tutorial, we will see how to reset the service on the Yamaha NMAX 125 scooter, a very simple and quick operation to perform only after comple…

How to replace the air filter in the Herald Classic 125?

In this tutorial, you will see how to replace the air filter in the Herald Classic 125, a very simple and quick operation. First, position yourself on the left side of the motorcycle, then grab the panel located under the seat, pull it towards you, and detach it from the frame. Next, unscrew the three fastening screws of the airbox cover, remove it, and take out the old filter from its housing. At this point, remove any dirt residue present, insert the replacement filter, and reassemble everything by following the reverse procedure.

Watch the video!


by ScegliAuto

More videos