Do it yourself
Frequently asked questions about cars and motorcycles
To change the motor oil of a Yamaha Majesty, start by warming up the engine for a few minutes to make the oil more fluid, then turn off the engine. Place the motorcycle on a center stand to ensure stability. Under the engine, locate the oil drain plug and position a collection basin underneath it. Use a wrench to loosen the drain plug and let the oil drain completely into the basin. Once all the oil has been drained, replace the drain plug and tighten it securely. Find the oil fill cap on the side of the engine and remove it. Use a funnel to slowly pour the recommended amount of new oil as stated in the owner's manual. After pouring the new oil, replace the fill cap. Start the engine and let it run for a few minutes, then turn it off and check for any leaks.

Posted on 16 March 2025 by ScegliAuto

Video tutorial

Related tutorials

Majesty 400 If you have just changed the oil on your 2009 Yamaha Majesty 400 but the warning light continues to illuminate, you need to perform the following man…
Majesty 400 To change the engine oil in the Yamaha Majesty 400, you need to unscrew the drain plug located at the bottom of the bike. Once it is unscrewed, colle…
Majesty 400 In this tutorial we can see how to replace the motor oil in the Yamaha Majesty 400 scooter, an extremely simple and quick operation. First of all, ma…

How to Service the Beta RR 350

This video will illustrate the steps to perform the routine maintenance service, replacing the engine oil and oil filter on the Beta RR 350 enduro bike. First, place the bike on a stand and start by loosening the oil drain bolt located under the engine, allowing it to drain into a container for about ten minutes; then clean the small oil filter (replacing it with a new one if too dirty). Finally, top up with new oil, of the correct type for your engine, filling to the maximum level!

Watch the video!


by ScegliAuto

More videos