Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How do you reset the V-Belt indicator of the Yamaha Nmax 155?

Model: Yamaha Nmax 155
Part: Warning light – error code

Video tutorial

In order to reset the V-Belt indicator of the Yamaha Nmax 155, you need to insert the ignition key into the appropriate slot so that it can be turned to turn on the instrument panel. Once the panel is on, you can press the button located on the right side of the instrument panel.

After a few seconds of holding down the button, you will notice that the V-Belt indicator on the instrument panel will start flashing. You must continue to hold down the button until the indicator goes off, and then turn off the instrument panel.


Posted on 15 April 2025 by ScegliAuto


Related tutorials

What Does the V-Belt Light Indicate on the Yamaha NMAX 155 Scooter and How to Reset It?
What Does the V-Belt Light Indicate on the Yamaha NMAX 155 Scooter and How to Reset It?
Nmax 155 If the V-Belt light on the instrument panel of your Yamaha NMAX 155 scooter has illuminated, it means it's time to replace the drive belt as it has r…
How to Reset the Engine Oil Light (Service) on a Yamaha Nmax 155
How to Reset the Engine Oil Light (Service) on a Yamaha Nmax 155
Nmax 155 These brief and simple steps will allow you to reset the maintenance light (service) on the Yamaha Nmax 155 scooter. First, place the scooter on its …
How to Reset the Oil Warning Light on the Yamaha NMAX 155 Scooter?
How to Reset the Oil Warning Light on the Yamaha NMAX 155 Scooter?
Nmax 155 In this tutorial, you will learn how to reset the oil warning light on the Yamaha NMAX 155 scooter, a very simple and quick operation. Before proceed…

How to Replace the Headlight Bulb on the Suzuki Address 110

To replace the headlight bulb on the Suzuki Address 110, you must completely remove the wing mirrors so that you can rotate them counterclockwise: once removed, proceed to loosen the screws securing the front fairing, located at the sides of the instrument cluster. Once the front fairing is removed, disconnect the internal connector of the headlight, allowing the bulb inside to be extracted and replaced with a new one; after replacement, reassemble all the removed parts.

Watch the video!


by ScegliAuto

More videos