Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
In this guide, we will see the instructions that will allow us to reset the transmission belt change warning on the Yamaha Nmax scooter. First, we put the scooter on the stand and start the instrument panel; then we press the left button until we reach the belt kilometers, then we press and hold the right button until the kilometers traveled and the belt change warning are reset, as shown in the video. At this point, we turn off the instrument panel and start the engine!

Posted on 2 May 2025 by ScegliAuto

This video is currently unavailable

Related tutorials

Reset the transmission belt change notification for the Yamaha Nmax
Reset the transmission belt change notification for the Yamaha Nmax
Nmax Today's instructions will show us how to reset the transmission belt change reminder on the Yamaha Nmax scooter. First, we put the scooter on the cen…
Resetting the Transmission Belt Change Light on a Yamaha Nmax
Resetting the Transmission Belt Change Light on a Yamaha Nmax
Nmax In this tutorial, you will learn how to reset the transmission belt change light on a Yamaha Nmax scooter in simple steps. First, place the scooter o…
How to reset the V-Belt warning light on the Yamaha NMAX scooter?
How to reset the V-Belt warning light on the Yamaha NMAX scooter?
Nmax In the Yamaha NMAX scooter, the V-Belt light indicates the need to perform maintenance on the transmission belt after exceeding the recommended inter…

Changing the Oil and Filter on the Kawasaki Versys

Here’s how to change the oil and filter on the Kawasaki Versys. Warm up the engine for a few minutes, place the motorcycle on the centre stand, open the filler cap, and remove the drain plug underneath the engine. Place a catch basin under the oil sump, unscrew the drain plug, and let the oil drain out. Unscrew the oil filter and let all the old oil drain out. Install a new filter and tighten it with the appropriate tool. Pour half a glass of new oil into the filler cap and wait for it to flow out of the drain hole, after which replace the plug. Fill with approximately 1.8 litres of new oil, take it for a short ride to circulate the oil in the engine, stop the engine, and check the level through the designated window. Top up if necessary.

Watch the video!


by ScegliAuto

More videos