Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
Following these brief and simple steps, we will see how to reset the belt change indicator light on the Yamaha Xmax 400 scooter. First, we put the scooter on the center stand and start by removing the side plastic cover found under the handlebars (bottom right); then we disconnect the electrical connector found underneath, turning on the instrument panel as shown in the video. At this point, we reconnect the connector, then turn off the panel and start the engine; we verify that the belt service indicator has been reset!

Posted on 16 May 2025 by ScegliAuto

Video tutorial

Related tutorials

Reset the belt change warning for the Yamaha Xmax 400.
Reset the belt change warning for the Yamaha Xmax 400.
Xmax 400 Following the instructions in this guide, we will see how to reset the warning for the replacement of the transmission belt of the Yamaha Xmax 400 sc…
How to reset the belt change on the Yamaha Xmax 400
How to reset the belt change on the Yamaha Xmax 400
Xmax 400 Today we will discover the instructions that will allow us to reset the transmission belt of the Yamaha Xmax 400 scooter. First of all, we put the sc…
How to reset the belt service on the Yamaha XMAX 400 scooter?
How to reset the belt service on the Yamaha XMAX 400 scooter?
Xmax 400 In this tutorial, we can see how to reset the belt service on the Yamaha XMAX 400 scooter, an extremely simple and quick operation. This service is i…

How to replace the engine oil in the Ducati Monster S2R 1000?

In this tutorial we can see how to replace the motor oil in the Ducati Monster S2R 1000, an extremely simple and fast operation. First of all, make sure that the engine is cold enough, then place a container underneath it, locate the drain plug and unscrew it using a hex key. Next, unscrew the cap of the secondary filter, remove it and clean it from any dirt residue. At this point, all that remains is to unscrew the main filter, tighten the replacement, reassemble everything and pour in the new oil through the appropriate hole.

Watch the video!


by ScegliAuto

More videos