Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Reset the belt change warning for the Yamaha Xmax 400.

Model: Yamaha Xmax 400
Part: Checks and maintenance

Video tutorial

Following the instructions in this guide, we will see how to reset the warning for the replacement of the transmission belt of the Yamaha Xmax 400 scooter. First of all, we put the scooter on the central stand and turn the key to the on position; then we select the partial kilometers of the belt change, as shown in the video.

Now we move the button at the bottom right towards "trip" for three seconds, until we move to the belt option; we hold down the button to the left and keep it pressed for twenty seconds, until the reset is complete!


Posted on 14 June 2025 by ScegliAuto


Related tutorials

How to Set the Time on a Yamaha XMAX 400?
How to Set the Time on a Yamaha XMAX 400?
Xmax 400 In this tutorial, you will see how to set the time on a Yamaha XMAX 400, a very simple and quick operation to perform, for example, after disconnecti…
How to reset the belt change on the Yamaha Xmax 400
How to reset the belt change on the Yamaha Xmax 400
Xmax 400 Following these brief and simple steps, we will see how to reset the belt change indicator light on the Yamaha Xmax 400 scooter. First, we put the sc…
How to Reset the Oil Change Light on a Yamaha XMAX 400 Scooter?
How to Reset the Oil Change Light on a Yamaha XMAX 400 Scooter?
Xmax 400 In this tutorial, you will see how to reset the oil change light on a Yamaha XMAX 400 scooter, a very simple and quick operation, to be performed onl…

How to replace the transmission oil in the KTM Exc 300

Today, let's discover how to carry out the routine maintenance service by replacing the transmission oil in the two-stroke enduro bike KTM Exc 300. First, place your bike on a stand and start by unscrewing the oil drain bolt located under the engine, allowing the gearbox oil to drain into a container for about ten minutes; then clean the small mesh oil filter, as shown in the video. At this point, unscrew the filler cap and top up with the new gearbox oil, the specifications of which are indicated in the owner's manual!

Watch the video!


by ScegliAuto

More videos